Annual Plumbing Inspection Includes:

  • Dye-check all toilets for water leaks.
  • Test water pressure to make sure you’re not risking damage to supply piping and fixtures.
  • Inspect temperature & pressure relief valve, and test for safe and proper operation.
  • Inspect water heater(s) for safe & proper operation.
  • Inspect drainage system for proper operation.
  • Inspect hot & cold water supply lines for leaks.
  • Visually inspect tub/shower grout for water-tight seal.
  • Check all sink traps for leaks.
  • Check condition of washing machine hoses and valves.
  • Check all hose bibs for proper operation.
  • Inspect exposed water piping for corrosion and electrolysis.
  • Inspect exposed gas piping for corrosion.
  • Visually inspect crawl space/basement for water/sewer leaks and standing water.
  • Optional service:  For an additional $125.00, we will perform a video inspection of the sewer to inspect for root intrusion, breaks, or any other defect which could lead to back-ups or blockages.  (This service requires an accessible, ground-level cleanout.)

At the time of your annual plumbing inspection, you’ll also receive one free can of Bio-Clean, a natural drain treatment to help prevent your drains from backing up.  Our technician will demonstrate proper application.

Annual Air-Conditioning System Inspection Includes:

  • Check thermostat for proper operation.
  • Monitor system during start-up.
  • Check and record unit supply voltage.
  • Check and record compressor’s running load amps.
  • Check and record indoor fan’s running load amps.
  • Check and record refrigerant levels, temperatures and pressures.
  • Clean and inspect condenser coils.
  • Inspect drain pan and condensate drain, and check for proper operation.
  • Inspect electrical connections.
  • Inspect belts for wear and tightness.
  • Inspect unit for foreign debris.
  • Check duct system for proper air-flow.
  • Inspect indoor and outdoor units for proper clearances.
  • Install owner-furnished air filter.

Annual Heating System Inspection Includes:

  • Check thermostat for proper operation.
  • Monitor system during start-up.
  • Check and record unit supply voltage.
  • Test furnace safety controls.
  • Inspect gas piping and venting for safe and proper operation.
  • Inspect heat exchanger for safe and proper operation.
  • Check and record indoor fan’s running load amps.
  • Inspect drain pan and condensate drain, and check for proper operation.
  • Inspect electrical connections.
  • Inspect belts for wear and tightness.
  • Inspect unit for foreign debris.
  • Check duct system for proper air-flow.
  • Inspect equipment for proper clearances.
  • Install owner furnished air filter.